Socket Mobile Ethernet Blaster Communications Cable Manual de usuario descargar pdf (Pagina 18)

1–14 Altera Corporation

EthernetBlaster Communications Cable User Guide December 2004

Cable Setup

2. Choose Programmer (Tools menu).

3. Click Hardware Setup. The Hardware Settings tab of the Hardware

Setup dialog box is displayed.

4. Click Add Hardware. The Add Hardware dialog box is displayed.

Select EthernetBlaster and click Auto Detect.

1 The server name list is automatically populated with the

EthernetBlaster communications cable detected on your

subnet if Auto Detect is selected. However, if the cable is

not on your subnet, you must manually type the name or IP

address of the EthernetBlaster cable in the Server Name

field of the Add Hardware dialog box.

If you are using a direct connection to your computer, type

192.168.0.50 in the Server Name field.

5. Type the server password in the Server password field (“password”

is the factory default), and click OK.

6. EthernetBlaster is now visible in the Available hardware items list

of the Hardware Setup dialog box, as shown in Figure 1–10 below.

Figure 1–10. Hardware Setup Dialog Box

7. Click Close to close the Hardware Setup dialog box.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 31 32

Sin comentarios

Socket Mobile Ethernet Blaster Communications Cable Manual de usuario Pagina 18