Socket-mobile Cordless Serial Adapter Manual de usuario Pagina 1

Cordless Serial Adapter with Bluetooth® Wireless Technology Instant cable-free serial connection for devices with an RS-232 serial port User’s Guide

4. In the Configuration box, the current configuration should be reported as no configuration loaded. To verify that you have properly connected, cli

5. Now you are ready to enter the Device role and properties. The appropriate settings will vary depending on what device(s) you are using and how th

SCENARIO 1: Set up a CSA pair for cable replacement. To set up a pair of Cordless Serial Adapters as serial cable replacement, one CSA must be an acce

3. Click on the Connections tab. Enter the following settings: • Accessibility: Select Connectable • Uncheck Only when DTR is asserted by local ho

5. Click on the Port Settings tab. Enter the appropriate settings for your devices and applications. Do not change any default settings in the Advanc

¾ Set up the Initiator 1. In the Device role box, select Initiator. Click Properties. Select Initiator. Click Properties. 2. In the General sc

3. Click on the Connections tab. Enter the following settings: • Accessibility: Select Connect automatically Uncheck Only when DTR is asserted by

6. Click on the Port Settings tab. Enter the appropriate settings for your devices and applications. All the settings should be the same as the CS

SCENARIO 2: Set up a CSA as a passive serial Bluetooth receiver. 1. In the Device role box, select Acceptor. Click Properties. Select Acceptor. Cl

3. Click on the Connections tab. Enter the following settings: • Accessibility: Select Connectable and Discoverable • Uncheck Only when DTR is as

July 2005 Document # 6410-00207 C Copyright Notice Copyright © 2005 Socket Communications, Inc. All rights reserved. Socket, the Socket logo and B

5. Click on the Port Settings tab. Enter the appropriate settings for your devices and applications. Do not change any of the default settings in the

STEP 5: Attach CSA to Device After configuring the CSA, now you are ready to attach it to the serial port of your target device. Assemble correct ha

CSA connects either automatically or with manual initiation. Depending on how your configured the CSA, it may automatically connect with the remote de

3 | Configuration Utility This chapter explains how to use Socket’s Cordless Serial Adapter Configuration Utility. Besides covering the basic config

Configuration Functions Get from adapter: Click to read the configuration currently written to the CSA. You can read the current configuration and

Replicate: Click to make a copy of the current configuration. A screen will appear for you to enter some unique settings (e.g., friendly name, securit

General Properties The General properties page displays general device identification, device class, and service class information. This page appears

Connections Properties — ACCEPTOR MODE Accessibility • Not Connectable: Select to prevent the CSA from connecting to other devices. • Connectable

Connections Properties — INITIATOR MODE When to connect • Connect automatically: Select for the CSA to connect automatically. Note: If you check

Notifications• Notify local host of Bluetooth events: Select ONLY IF you know your local host can accept notifications of Bluetooth events. Some devi

Table of Contents 1 | INTRODUCTION 4 2 | SETUP 6 STEP 1: Install the Software 6 STEP 2: Attach the CSA to the Computer 8 STEP 3: Prepare Communicati

Remote Target (Initiator only) You have two options for identifying the remote device (the device you wish the CSA to connect to): OPTION 1: If yo

2. Click Discover… The utility will search for Bluetooth devices in range. 3. In the Discovered devices field, click on the Bluetooth address of

Port Settings Select the correct port settings for your remote device. IMPORTANT! After entering all the adapter properties, click OK to exit

Advanced (Acceptor only) Important! It is beyond the scope of this User’s Guide to explain the effects of the Advanced settings. DO NOT adjust any

Appendix A Specifications Physical Characteristics: Dimensions: 65 x 35 x 17 mm Total Mass: 25 g Serial Connector: 9 pin male DB-9, DTE Ante

Pin Assignments Pin # DirectionFunction 1 IN DCD — Carrier detect 2 IN RXD serial data from local host 3 OUT TXD serial data to local host 4

Appendix B Safety and Usage Tips About Bluetooth and Health Bluetooth wireless technology allows you to use short-range radio signals to connect a va

• Do not use the Cordless Serial Adapter in a place with risk of strong vibration. • Do not use benzene or paint thinner to clean the Cordless Seria

FCC Report and Order, ET Do

Appendix C Glossary A, B, C Acceptor A Bluetooth enabled device that accepts an action (e.g., a connection) from another Bluetooth enabled device,

1 | Introduction Overview Socket’s Cordless Serial Adapter (CSA) with Bluetooth Wireless Technology eliminates your conventional RS-232 serial cable

F, G, I female serial port A serial port with pinholes flow control The control of transmission between communications devices, to make sure the sen

devices to interoperate in serial communications, both devices must have this profile service class The type of service that a Bluetooth enabled devi

Appendix D Troubleshooting SYMPTOM: The Configuration Utility is not working properly (e.g., I cannot read the settings from the CSA) and/or I get a

Appendix E Technical Support If you have trouble installing or using the Cordless Serial Adapter with Bluetooth Wireless Technology, Socket has two

Limited Warranty Socket Communications Incorporated (Socket) warrants this product against defects in material and workmanship, under normal use and

Limited Software Warranty LIMITED WARRANTY. SOCKET warrants that the original disk or CD ROM is free from defects for 90 days from the date of delive

Regulatory Compliance The Socket Cordless Serial Adapter with Bluetooth Wireless Technology is designed to be compliant with the rules and regulation

To comply with Industry Canada RF exposure compliance requirements, the following antenna installation and device operating configurations must be sat

Note that the radio frequency band used by this equipment has not been harmonized in all the EU. Applicable area (nation): Austria, Belgium, Denmark,

© Socket Communications, Inc. 7/2005 Printed in U.S.A. © Socket Communications, Inc. 7/2005 Printed in U.S.A.

Custom versions of the CSA are available to OEMs. For more information, contact: [email protected]. Notes: • The Cordless Serial Adapter was

2 | Setup This chapter covers the setup procedure for the Cordless Serial Adapter with Bluetooth Wireless Technology. Please note that no drivers ar

4. In the next screen, click Configuration Utility. 5. In the File Download screen, click Open. 6. Follow the instructions on your screen to

STEP 2: Attach the CSA to the Computer 1. Attach the Cordless Serial Adapter (CSA) to the serial port of the computer you just installed the software

STEP 4: Configure the CSA Socket’s Cordless Serial Adapter Configuration Utility lets you reprogram the default settings on the CSA for Bluetooth. You