Socket-mobile 56K Modem Card Manual de usuario

56K Modem Card CompactFlash modem card and software for adding connectivity to the following mobile computers: • Pocket PC 2000/2002/2003 • Handhe

10 | CHAPTER 2: SETUP FOR WINDOWS CE Pocket PC 2000 Make a New Connection 1. Go to Start | Settings | Connections. Tap on Modem. 2. In the next s

CHAPTER 2: SETUP FOR WINDOWS CE | 11 4. Enter the dial-up number and tap Next. You can enter the phone number without spaces or dashes. Important

12 | CHAPTER 2: SETUP FOR WINDOWS CE 2. In the next screen, enter the settings appropriate for your telephone line: If you DO NOT need to dial a num

CHAPTER 2: SETUP FOR WINDOWS CE | 13 Pocket PC 2002 Make a New Connection 1. Go to Start | Settings | Connections. Tap on Connections. 2. In th

14 | CHAPTER 2: SETUP FOR WINDOWS CE 4. In the next screen, enter the following settings. 1. Enter a name…: Enter a name, such as “My 56K Connectio

CHAPTER 2: SETUP FOR WINDOWS CE | 15 6. Make sure Wait for dial tone before dialing is checked. Tap Finish. 7. In Internet Settings, if multiple c

16 | CHAPTER 2: SETUP FOR WINDOWS CE In the next screen, enter the settings appropriate for your telephone line. If you DO NOT need to dial a number

CHAPTER 2: SETUP FOR WINDOWS CE | 17 Pocket PC 2003 Note: These instructions are for setting up a standard dial-up connection to an Internet Service

18 | CHAPTER 2: SETUP FOR WINDOWS CE 4. Tap on the Tasks tab. In most cases, you should tap Add a new modem connection under My ISP. 5. In the ne

CHAPTER 2: SETUP FOR WINDOWS CE | 19 6. In the next screen, enter the User name and Password. Tap Advanced. 7. In the General screen, select the

2 | Table of Contents CHAPTER 1 INTRODUCTION 4 Overview 4 Package Contents 5 Hardware Features 5 CHAPTER 2 SETUP FOR WINDOWS CE 6 Installation

20 | CHAPTER 2: SETUP FOR WINDOWS CE Handheld PC Devices This section explains how to set up the modem connection for a Handheld PC, Handheld PC Pro o

CHAPTER 2: SETUP FOR WINDOWS CE | 21 4. In Port Settings, in the Baud Rate field, select 57600. Tap on the Call Options tab. 5. Make sure Wait for

22 | CHAPTER 2: SETUP FOR WINDOWS CE Enter Dialing Properties 1. When you return to the Remote Networking screen, tap on the icon for the connection

CHAPTER 2: SETUP FOR WINDOWS CE | 23 If you DO need to dial a number to use an external line (e.g., 9), do the following: a) In the When dialing from

24 | CHAPTER 2: SETUP FOR WINDOWS CE STEP 6: Connect to a Telephone Line With the card still in your mobile computer, connect to an analog telephone l

CHAPTER 2: SETUP FOR WINDOWS CE | 25 Pocket PC 2000 1. Go to Start | Programs | Connections. Tap on the icon for the modem connection you created in S

26 | CHAPTER 2: SETUP FOR WINDOWS CE To access this screen any time, go to: Start – Settings – Connections -Connections. You may need to modify your

CHAPTER 2: SETUP FOR WINDOWS CE | 27 Pocket PC 2003 Socket recommends using either of two methods for dialing in and connecting to your network. METH

28 | CHAPTER 2: SETUP FOR WINDOWS CE 4. The device will begin dialing. When the Pocket PC tries to connect, the Power and Data LEDs will blink.

CHAPTER 2: SETUP FOR WINDOWS CE | 29 METHOD 2: Dial automatically from your application Note: After you have set up a dial-up connection, the Connect

3 APPENDIX A SPECIFICATIONS 50 APPENDIX B NETWORK INFORMATION 51 APPENDIX C SUPPORT RESOURCES 52 Technical Support 52 Users’ Forum 53 Limited Wa

30 | CHAPTER 2: SETUP FOR WINDOWS CE 3. When the Pocket PC tries to connect, the Power and Data LEDs will blink. After the device connects, it will r

CHAPTER 2: SETUP FOR WINDOWS CE | 31 Handheld PC Devices 1. After setting up the dial-up connection in Step 5, you will already be in the Dial-Up Co

32 | CHAPTER 2: SETUP FOR WINDOWS CE OPTIONAL: Set up the Card for Your Country In order to set up the card for your country, you must first install S

CHAPTER 2: SETUP FOR WINDOWS CE | 33 OPTIONAL: Check Connection Time Pocket PC 2003 The Connection Manager reports the connection time. Tap on the co

34 | CHAPTER 3: SETUP FOR CASIO BE-300 Chapter 3 Setup for Casio BE-300 This chapter explains how to install and use the 56K Modem Card with a Casio

CHAPTER 3: SETUP FOR CASIO BE-300 | 35 STEP 3: Install the Software Should I install Socket’s WhereAreYou? software? You have two options for softw

36 | CHAPTER 3: SETUP FOR CASIO BE-300 6. When installation is complete, disconnect the mobile computer from the host PC. Soft reset the mobile compu

CHAPTER 3: SETUP FOR CASIO BE-300 | 37 STEP 4: Insert the Card Note: If you installed Socket’s WhereAreYou? software, you may want to use it now to s

38 | CHAPTER 3: SETUP FOR CASIO BE-300 STEP 5: Set up the Dial-up Connection You will need your dial-up information for this step. Unlike for other de

CHAPTER 3: SETUP FOR CASIO BE-300 | 39 STEP 6: Connect to a Telephone Line With the card still in your mobile computer, connect to an analog telephone

4 | CHAPTER 1: INTRODUCTION Chapter 1 Introduction Overview Thank you for purchasing the Socket 56K Modem Card. The Socket 56K Modem Card allows

40 | CHAPTER 3: SETUP FOR CASIO BE-300 Ending a Data Call 1. Tap on the connection icon at the bottom of your screen. 2. In the connection status s

CHAPTER 3: SETUP FOR CASIO BE-300 | 41 OPTIONAL: Set up the Card for Your Country In order to set up the card for your country, you must first install

42 | CHAPTER 3: SETUP FOR CASIO BE-300 OPTIONAL: Check Connection Time Socket’s software includes a control panel applet that lets you quickly view t

CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP | 43 Chapter 4 Setup for Windows 95/98/Me/2000/XP This chapter explains how to install and use the 56K

44 | CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP STEP 3: Insert the Card 1. Insert the 56K Modem Card into a CompactFlash-to-PC Card adapter, with

CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP | 45 STEP 4: Install the Drivers Follow the wizard to install the modem drivers, making the appropriate

46 | CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP STEP 5: Set up Your Dial-up Connection To set up your dial-up connection, use the network connectio

CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP | 47 STEP 6: Connect to a Telephone Line With the card still in your computer, connect to an analog tele

48 | CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP OPTIONAL: Set up Advanced Networking Follow the steps below to set up a dial-up connection for a RA

CHAPTER 4: SETUP FOR WINDOWS 95/98/Me/2000/XP | 49 Windows 2000 — (a) Right-click on the icon for the connection you just created. In the pop-up men

CHAPTER 1: INTRODUCTION | 5 Package Contents The Socket 56K Modem Card package includes the following items: • Socket 56K Modem Card • Socket 56K M

50 | APPENDIX A: SPECIFICATIONS Appendix A Specifications Physical Characteristics: CF I/O Card Size: 88 x 42.8 x 14.8 mm Power Consumption (DC 3.

APPENDIX B: NETWORK INFORMATION | 51 Appendix B Network Information Network Information Form For Advanced Users Only Contact your office network ad

52 | APPENDIX C: SUPPORT RESOURCES Appendix C Support Resources Technical Support If you have trouble installing or using the 56K Modem Card, Socket

APPENDIX C: SUPPORT RESOURCES | 53 inquiry via email, we can arrange for a technical support representative to call you at a specific time. • Call o

54 Limited Warranty Socket Communications Incorporated (Socket) warrants this product against defects in material and workmanship, under normal use a

55 Limited Software Warranty LIMITED WARRANTY. SOCKET warrants that the original disk or CD ROM is free from defects for 90 days from the date of del

June 2003 Document # 6410-00168 C Copyright Notice Copyright © 2003 Socket Communications, Inc. All rights reserved. Socket, the Socket logo and

Printed in U.S.A.

6 | CHAPTER 2: SETUP FOR WINDOWS CE Chapter 2 Setup for Windows CE This chapter explains how to install and use the 56K Modem Card with a Pocket PC

CHAPTER 2: SETUP FOR WINDOWS CE | 7 STEP 3: Install the Software Should I install Socket’s WhereAreYou? software? You have two options for software

8 | CHAPTER 2: SETUP FOR WINDOWS CE 4. The Setup Center will appear in your browser. Follow the instructions on your screen to install the software f

CHAPTER 2: SETUP FOR WINDOWS CE | 9 STEP 4: Insert the Card Note: If you installed Socket’s WhereAreYou? software, you may want to use it now to set